MILWAUKEE 4932478796 - Inkzall Set Of Markers Counter Display
1. The tip remains sharp, does not form a mushroom, or recoils under pressure 2. The acrylic blade is ideal for rough surfaces such as OSB and concrete 3. The marker continues to write more than 72 hours after removing the cap 4. It can be used for concrete, wood, metal, plywood, OSB, plastics they can be used on wet, oily, covered with dust, rusty surfaces with small debris fragments 5. Short drying time - reduced smearing of markings on PVC and metal surfaces 6. The thin design allows use in tight, hard-to-reach places hook for a protective helmet - can be attached to a construction helmet, trouser, or overalls 7. Easy-opening cap, operated with one hand 8. Lanyard attachment hole, e.g. for attaching a marker to a belt 9. Design to prevent the marker from rolling away ,
INKZALL PROMO COUNTER DISPLAY Milwaukee's Inkzall markers are ideal for on-site marking, marking, and marking. They are characterized by a quick drying time and no smudging on the surfaces. Set contains 108 markers. The set includes markers: Oil: 12 pcs - Yellow, white, and black, with standard tip: 36 pcs red and black 1. Ink valve 2. Writes on surfaces with a temperature from -10 ° to 150 ° C thanks to a specially developed and proprietary composition 3. It writes on surfaces that traditional markers would not be able to do 4. Writes on the dirtiest, hottest, and roughest surfaces 5. For use on black, aluminum, PVC, steel, rubber, and tire tubing 6. The drying time of the inscription 10 sec 7. Inscription resistant to water and UV rays 8. Provides the user with the highest durability 9. Tip with valve 10. It does not contain xylon 11. Important: shake the marker with the cap on. open and then press the tip until the ink flows out ,
1. The tip remains sharp, does not form a mushroom, or recoils under pressure 2. The acrylic blade is ideal for rough surfaces such as OSB and concrete 3. The marker continues to write more than 72 hours after removing the cap 4. It can be used for concrete, wood, metal, plywood, OSB, plastics they can be used on wet, oily, covered with dust, rusty surfaces with small debris fragments 5. Short drying time - reduced smearing of markings on PVC and metal surfaces 6. The thin design allows use in tight, hard-to-reach places hook for a protective helmet - can be attached to a construction helmet, trouser, or overalls 7. Easy-opening cap, operated with one hand 8. Lanyard attachment hole, e.g. for attaching a marker to a belt 9. Design to prevent the marker from rolling away ,
Warranty terms
The company will repair, free of charge, any malfunctions resulting from manufacturing or labor defects, within a period of one year from the date of purchase, taking into account the following:
- The warranty does not cover damages resulting from wear and tear or misuse. Wear and tear refers to the number of hours or the environment in which the device has been used as this affects the engine pads, switches, throttles, clutches, gear housings, carbon deposits, cases or bit holders, instrument housings, wires and cables, rubber parts and accessories (such as batteries). Chargers, protectors, flanges like those used in grinders, etc.).
- The guarantee is void when the devices are repaired in other than approved repair centers
- The guarantee is void if the power cord (the block) is cut.
- The warranty does not include the repair of the truck and the battery for chargers
- Warranty does not include laser devices
It also does not include:
- Falls or strong shocks
- Penetration of foreign objects (such as nails, screws, etc.)
- Using the device for other than its intended use
- No modification to the device
- Prolonged exposure to extreme weather conditions
- Using the wrong voltages
- Using the wrong accessories or accessories
- Lack of maintenance required (especially hammers) Use of wrong grease
- Not using the original spare parts in the repair
Write Your Own Review
