DELTAPLUS MCVESGRXG - GREY M2 CORPORATE JACKET XL

GREY M2 CORPORATE JACKET XL

Jacket with a straight silhouette, with a central zipper closed with a windproof flap, with a turn-down collar, with a large number of patch pockets and lined pockets.  Sleeves with elbow seams and cuffs are fixed with tape. The armpit area has perforated ventilation holes.

The width of the jacket along the waist line is adjustable.

Material: Mixed fabric (65% polyester, 35% cotton), density 245gsm.

Jacket with straight silhouette, central zipper, closed wind flap, closed with buttons and tape, turn-down collar, and set-in sleeves.

. The middle section has patch pockets with flaps secured with velcro; On the right pocket there is an additional zippered pocket.

 At the bottom there are patch pockets with flaps secured with velcro; On the pockets there are additional pockets with slanted entry.

The belt is sewn to the bottom of the jacket. The width of the jacket along the waistline is adjustable on both sides using a belt with a button closure.

The back consists of two parts: a yoke and a main part. The main part has pleats for freedom of movement. The hanger is sewn to a length of 6-

7 cm at the intersection of the collar and yoke.

Cut the sleeves along the undone line,

At the bottom of the sleeve there is a cuff secured with tape. There are seams at the elbows for freedom of movement. The armpit area has perforated ventilation holes.

Warranty terms

The company will repair, free of charge, any malfunctions resulting from manufacturing or labor defects, within a period of one year from the date of purchase, taking into account the following:

• The warranty does not cover damages resulting from wear and tear or misuse. Wear and tear refers to the number of hours or the environment in which the device has been used as this affects the engine pads, switches, throttles, clutches, gear housings, carbon deposits, cases or bit holders, instrument housings, wires and cables, rubber parts and accessories (such as batteries). Chargers, protectors, flanges like those used in grinders, etc.).
• The guarantee is void when the devices are repaired in other than approved repair centers
• The guarantee is void if the power cord (the block) is cut.
• The warranty does not include the repair of the truck and the battery for chargers
• Warranty does not include laser devices

It also does not include:

• Falls or strong shocks
• Penetration of foreign objects (such as nails, screws, etc.)
• Using the device for other than its intended use
• No modification to the device
• Prolonged exposure to extreme weather conditions
• Using the wrong voltages
• Using the wrong accessories or accessories
• Lack of maintenance required (especially hammers) Use of wrong grease
• Not using the original spare parts in the repair