Back to Top
DEWALT D25731K-B5 - COMBINATION HAMMER 7KG 48MM SDS MAX
Tool Holder: SDS-Max
Power Input: 1350 Watts
Power Output: 840 Watt
Impact energy (EPTA 05/2009): 11 J
Load Speed: 132-265 rpm
Blows per Minute: 1225-2450 bpm
Max. Drilling Capacity [Concrete]: 48 mm
Max. Drilling Capacity [Breakthrough bit]: 80 mm
Max. Drilling Capacity [Core bit]: 115 mm
Weight: 8.7 kg
Length: 528 mm
Height: 268 mm
Width: 116 mm
Hand/Arm Vibration – Hammer drilling into concrete: 8.9 m/sý
Uncertainty K 1 (Vibration): 1.5 m/sý
Hand/Arm Vibration – Chiselling: 8.1 m/sý
Uncertainty K 2 (Vibration): 1.5 m/sý
Sound Pressure: 96 dB(A)
Sound Pressure Uncertainty: 3 dB(A)
Sound Power: 107 dB(A)
Sound Power Uncertainty: 3 dB(A)
Ideal for drilling anchor fixing and through holes in concrete and masonry from 12 to 48 mm in diameter. Core drilling up to 115 mm
Active vibration control system incorporating a floating rear handle and damped side handle to reduce vibration
Ergonomic; compact and slim line design maximises control and offers easy access to confined spaces
Electronic variable speed and impact energy control
Lock-on switch for chipping
Rotation-stop for demolition applications in brick; masonry and light chasing in concrete
Brush wear and service indicators
Tool Holder: SDS-Max
Power Input: 1350 Watts
Power Output: 840 Watt
Impact energy (EPTA 05/2009): 11 J
Load Speed: 132-265 rpm
Blows per Minute: 1225-2450 bpm
Max. Drilling Capacity [Concrete]: 48 mm
Max. Drilling Capacity [Breakthrough bit]: 80 mm
Max. Drilling Capacity [Core bit]: 115 mm
Weight: 8.7 kg
Length: 528 mm
Height: 268 mm
Width: 116 mm
Hand/Arm Vibration – Hammer drilling into concrete: 8.9 m/sý
Uncertainty K 1 (Vibration): 1.5 m/sý
Hand/Arm Vibration – Chiselling: 8.1 m/sý
Uncertainty K 2 (Vibration): 1.5 m/sý
Sound Pressure: 96 dB(A)
Sound Pressure Uncertainty: 3 dB(A)
Sound Power: 107 dB(A)
Sound Power Uncertainty: 3 dB(A)
Visibility | Catalog, Search |
---|
Warranty terms
The company will repair, free of charge, any malfunctions resulting from manufacturing or labor defects, within a period of one year from the date of purchase, taking into account the following:
- The warranty does not cover damages resulting from wear and tear or misuse. Wear and tear refers to the number of hours or the environment in which the device has been used as this affects the engine pads, switches, throttles, clutches, gear housings, carbon deposits, cases or bit holders, instrument housings, wires and cables, rubber parts and accessories (such as batteries). Chargers, protectors, flanges like those used in grinders, etc.).
- The guarantee is void when the devices are repaired in other than approved repair centers
- The guarantee is void if the power cord (the block) is cut.
- The warranty does not include the repair of the truck and the battery for chargers
- Warranty does not include laser devices
It also does not include:
- Falls or strong shocks
- Penetration of foreign objects (such as nails, screws, etc.)
- Using the device for other than its intended use
- No modification to the device
- Prolonged exposure to extreme weather conditions
- Using the wrong voltages
- Using the wrong accessories or accessories
- Lack of maintenance required (especially hammers) Use of wrong grease
- Not using the original spare parts in the repair
Write Your Own Review