EUROBOOR ECO.100S+/TD 220 - Magnetic drilling machine ø100 220V
- The portable Euroboor ECO.100S /TD magnetic drill has a unique swivel base, allowing the machine to rotate 30º to either side and to slide 15 - 20 mm (9/16?- 13/16?) forwards and backwards
- This magnetic core drilling machine drills holes up to ø 100 mm (4?) and is particularly suitable for tapping
- The machine benefits not only from an oil-lubricated gearbox but also from innovative electronics that provide even greater safety, significantly reducing the risk of damage to the machine, tool and workpiece while protecting the operator in the event of excessive vibration or sudden movement
- The service life is considerably longer and high maintenance costs are avoided
- Swivel base for accurate positioning
- Four-speed gearbox
- Extremely suitable for tapping
- Rotating right/left
- Electrical speed control
- Overheat protection
- Magneet LED Indicator
- Powerful CNC machined 2-way magnet
- Carbon brush protection: - Brush wear indicator - Automatic shutdown
- GYRO-TEC safety
- Self protection - Overvoltage protection - Fluctuation protection
- Oil-lubricated gearbox
EUROBOOR, ECO.100S+/TD 220, Magnetic drilling machine ø100 220V
- Core drills Ø 12 - 100 mm
- Twist drills Ø 1 - 31,75 mm
- Galvanizing Ø 10 - 105 mm
- Taps M3 - M30
- Length 365 mm
- Width 310 mm
- Hooght 510 - 710 mm
- Stroke 260 mm
- Weight 31 kg
- Magnet (l x w x h) 220 x 110 x 64 mm
- Magnetic force 3000 kg
- Motor power 1900 W
- Total power 2050 W
- Toerental (onbelast) (I) 42 - 110 rpm (II) 65 - 190 rpm (III) 140 - 400 rpm (IV) 220 - 620 rpm
- Speed (loaded 1900 W) (I) 85 rpm (II) 152 rpm (III) 270 rpm (IV) 480 rpm Shaft MT3 19.05 mm
- Power supply 110 - 120 V / 60 Hz 220 - 240 V / 50 - 60 Hz
- The portable Euroboor ECO.100S /TD magnetic drill has a unique swivel base, allowing the machine to rotate 30º to either side and to slide 15 - 20 mm (9/16?- 13/16?) forwards and backwards
- This magnetic core drilling machine drills holes up to ø 100 mm (4?) and is particularly suitable for tapping
- The machine benefits not only from an oil-lubricated gearbox but also from innovative electronics that provide even greater safety, significantly reducing the risk of damage to the machine, tool and workpiece while protecting the operator in the event of excessive vibration or sudden movement
- The service life is considerably longer and high maintenance costs are avoided
- Swivel base for accurate positioning
- Four-speed gearbox
- Extremely suitable for tapping
- Rotating right/left
- Electrical speed control
- Overheat protection
- Magneet LED Indicator
- Powerful CNC machined 2-way magnet
- Carbon brush protection: - Brush wear indicator - Automatic shutdown
- GYRO-TEC safety
- Self protection - Overvoltage protection - Fluctuation protection
- Oil-lubricated gearbox
Warranty terms
The company will repair, free of charge, any malfunctions resulting from manufacturing or labor defects, within a period of one year from the date of purchase, taking into account the following:
- The warranty does not cover damages resulting from wear and tear or misuse. Wear and tear refers to the number of hours or the environment in which the device has been used as this affects the engine pads, switches, throttles, clutches, gear housings, carbon deposits, cases or bit holders, instrument housings, wires and cables, rubber parts and accessories (such as batteries). Chargers, protectors, flanges like those used in grinders, etc.).
- The guarantee is void when the devices are repaired in other than approved repair centers
- The guarantee is void if the power cord (the block) is cut.
- The warranty does not include the repair of the truck and the battery for chargers
- Warranty does not include laser devices
It also does not include:
- Falls or strong shocks
- Penetration of foreign objects (such as nails, screws, etc.)
- Using the device for other than its intended use
- No modification to the device
- Prolonged exposure to extreme weather conditions
- Using the wrong voltages
- Using the wrong accessories or accessories
- Lack of maintenance required (especially hammers) Use of wrong grease
- Not using the original spare parts in the repair
Write Your Own Review