MILLER 907808 - MILLERMATIC 355
Input Power: 220-240V 1 phase VAC 50Hz
Rated Output: 200A at 28VDC, 20% Duty Cycle
Amps Input at Rated Load Output: 50/60HZ 35Amp
10 Voltage steps
Wire Feed Speed: 1.1-20m/min.
Dimensions (W x H x D): 480 x 700 x 920mm
Weight: 64.0kg
Supplied with; Earth cable, power cord (without plug) drive roll kit 0.8 / 1.0mm / V-groove.
Mig torch and Regulator sold separately to suit application.
Miller, 907808, Millermatic 355
The Migmatic 220 delivers superior performance arc control technology, providing the operator with state-of-the-art performance in a wide range of materials. The traditional tapped and laminated inductor design provides a stable, smooth arc that operators will appreciate.
Euro-Style Torch adapter for quick and easy installation of professional style torches, allows the operator to have a separate torch for other applications.
Simple and straight forward stepped voltage switch and a rotary wire feed speed control for optimum weld current setting.
Adjustable Burn-back control allows the operator to optimize arc starts and stops, reducing wire stubbing or wire burning back onto the contact tip.
Ergonomic, easy to operate controls allows the operator easy set-up.
Traditional tapped design and laminated inductor provides a stable, smooth arc which operators appreciate.
A thermal overload protection shuts down the power source output, if overheating of either the main transformer or rectifier should occur.
Industrial dual-gear-driven, features no-tool, quick-change reversible drive rolls 0.8 – 1.0 mm, easy-to-set, scaled, tension adjustment knob.
Spot Weld Timer provides consis¬tent spot welds every time.
Factory fitted with running gear and cylinder rack.
Input Power: 220-240V 1 phase VAC 50Hz
Rated Output: 200A at 28VDC, 20% Duty Cycle
Amps Input at Rated Load Output: 50/60HZ 35Amp
10 Voltage steps
Wire Feed Speed: 1.1-20m/min.
Dimensions (W x H x D): 480 x 700 x 920mm
Weight: 64.0kg
Supplied with; Earth cable, power cord (without plug) drive roll kit 0.8 / 1.0mm / V-groove.
Mig torch and Regulator sold separately to suit application.
Warranty terms
The company will repair, free of charge, any malfunctions resulting from manufacturing or labor defects, within a period of one year from the date of purchase, taking into account the following:
- The warranty does not cover damages resulting from wear and tear or misuse. Wear and tear refers to the number of hours or the environment in which the device has been used as this affects the engine pads, switches, throttles, clutches, gear housings, carbon deposits, cases or bit holders, instrument housings, wires and cables, rubber parts and accessories (such as batteries). Chargers, protectors, flanges like those used in grinders, etc.).
- The guarantee is void when the devices are repaired in other than approved repair centers
- The guarantee is void if the power cord (the block) is cut.
- The warranty does not include the repair of the truck and the battery for chargers
- Warranty does not include laser devices
It also does not include:
- Falls or strong shocks
- Penetration of foreign objects (such as nails, screws, etc.)
- Using the device for other than its intended use
- No modification to the device
- Prolonged exposure to extreme weather conditions
- Using the wrong voltages
- Using the wrong accessories or accessories
- Lack of maintenance required (especially hammers) Use of wrong grease
- Not using the original spare parts in the repair