Back to Top
Milwaukee M18 FN18GS-0X - GAUGE BRAD FINISHING NAILER
FEATURES
Consistent, clean nail holes driven subflush in both hardwoods and softwoods
Tool free drive depth adjustment
Zero ramp-up time with no delay between trigger pull and nail fire
Fires up to three nails per second
Compact size provides clear line of sight for accurate nail placement
LED work light illuminates the work surface for optimal placement of nails
Nose size allows for increased access in corners and tight spaces
Dry fire lockout prevents the tool from being fired when no nails are left in the magazine
No gas cartridge or cleaning required for low cost of ownership and minimal maintenance
Sequential and contact (bump) actuation firing modes
Easily accessible tool free jam clearing latch
Three interchangeable workpiece contact tips included for various applications
Fires up to 1,200 nails per charge on a M18™ REDLITHIUM™-ION 2.0Ah battery pack
Reversible belt hook
On/Off power button for enhanced safety
The M18 FUEL™ 18 Gauge Brad Finishing Nailer delivers peak productivity on the jobsite, providing users with the power to nail, without the hassle of a compressor and hose. Leveraging Milwaukee's nitrogen air spring mechanism, the M18 FUEL™ 18 Gauge Brad Finishing Nailer allows users to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of the POWERSTATE™ Brushless Motor and REDLINK™ PLUS Intelligence delivers users the ability for fast nailing, with a fire rate of 3 nails per second (in contact actuation mode) with zero ramp-up time, for maximum efficiency throughout the day. Additionally, the nailer operates using our REDLITHIUM™-ION batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and maintenance associated with other nailers. The M18 FUEL™ 18 Gauge Brad Finishing Nailer is compact in size, and lightweight, providing the user with unmatched access into tight spaces and limiting fatigue with low recoil. The M18 FUEL™ 18 Gauge Brad Finishing Nailer delivers the pneumatic performance that professional carpenters and remodelers expect, with the freedom and convenience of cordless technology.
FEATURES
Consistent, clean nail holes driven subflush in both hardwoods and softwoods
Tool free drive depth adjustment
Zero ramp-up time with no delay between trigger pull and nail fire
Fires up to three nails per second
Compact size provides clear line of sight for accurate nail placement
LED work light illuminates the work surface for optimal placement of nails
Nose size allows for increased access in corners and tight spaces
Dry fire lockout prevents the tool from being fired when no nails are left in the magazine
No gas cartridge or cleaning required for low cost of ownership and minimal maintenance
Sequential and contact (bump) actuation firing modes
Easily accessible tool free jam clearing latch
Three interchangeable workpiece contact tips included for various applications
Fires up to 1,200 nails per charge on a M18™ REDLITHIUM™-ION 2.0Ah battery pack
Reversible belt hook
On/Off power button for enhanced safety
Visibility | Catalog, Search |
---|
Warranty terms
The company will repair, free of charge, any malfunctions resulting from manufacturing or labor defects, within a period of one year from the date of purchase, taking into account the following:
- The warranty does not cover damages resulting from wear and tear or misuse. Wear and tear refers to the number of hours or the environment in which the device has been used as this affects the engine pads, switches, throttles, clutches, gear housings, carbon deposits, cases or bit holders, instrument housings, wires and cables, rubber parts and accessories (such as batteries). Chargers, protectors, flanges like those used in grinders, etc.).
- The guarantee is void when the devices are repaired in other than approved repair centers
- The guarantee is void if the power cord (the block) is cut.
- The warranty does not include the repair of the truck and the battery for chargers
- Warranty does not include laser devices
It also does not include:
- Falls or strong shocks
- Penetration of foreign objects (such as nails, screws, etc.)
- Using the device for other than its intended use
- No modification to the device
- Prolonged exposure to extreme weather conditions
- Using the wrong voltages
- Using the wrong accessories or accessories
- Lack of maintenance required (especially hammers) Use of wrong grease
- Not using the original spare parts in the repair
Write Your Own Review